Ergodyne Squids 3745 Tool Grip and Tether Attachment Point - Black
-
Qty total:0
-
Subtotal:$0.00
Description
Item#: ERGO-3745-Black Description
The Squids 3745 Tool Grip and Tether Attachment Point (2-pack) installs onto screwdrivers and nut drivers to create a retrofit attachment point for tethering tools up to 1lb // 0.45kg, preventing dropped or falling objects from occurring on the job. Connection points for tool lanyards can be tricky to find, especially on smaller hand tools like screwdrivers and nut drivers. While working at heights, it is important to tether tools as part of your overall fall protection plan, but the lack of these connection points can make that difficult.
STRAIGHTFORWARD INSTALLATIONDesigned in two pieces, this tool attachment features an end cap and a rubber sleeve. To install, slide a screwdriver or nut driver into the rubber sleeve and plug the end cap’s pegs into the reinforced holes of the rubber sleeve. The sleeve features a textured rubber and is ergonomically designed to cover the entire tool handle—providing greater comfort, torque and an enhanced grip. The end cap features a swiveling connection point for tool tethering, which helps prevent tangles and binding when used with a tool lanyard.
Built-in trim lines on the sleeve allows for this tool attachment to be customized to fit varying driver lengths. A flexible opening on the bottom of the rubber sleeve expands to allow for larger nut drivers to be installed. Unlike competition, this tool attachment grip can be installed, removed and re-installed multiple times. The swiveling tool attachment portion does not interfere with proper holstering or prevent a user from pressing down on the end of the tool to gain leverage when using.
TESTED TO BE TRUSTEDThese tool tether attachments are built to withstand defined weight limits and can easily be used by any worker to help avoid accidentally dropping objects that could cause damage, injuries or possibly death. These attachments are third-party certified to 1lb // 0.45kg maximum capacity and meet the ANSI/ISEA 121-2018 standard with all required labeling.
Ideal for those tethering tools in construction, telecommunications, oil and gas, power generation, utilities, wind energy, manufacturing or other jobsites where dropped objects are a risk.
This tool attachment is compatible with screwdrivers or nut drivers with handles ranging from 1in // 2.5cm to 1.28in // 3.2cm in diameter and a handle height of 4.5in // 11.4cm
- MEETS THE ANSI/ISEA 121-2018 STANDARD - Third party certified to an 1lb // 0.45kg maximum working capacity
- RETROFIT TOOL ATTACHMENT POINT - Designed to encapsulate screwdrivers or nut drivers to create a tool attachment point for tethering
- TWO-PIECE DESIGN - Includes an end cap and rubber sleeve
- EASY INSTALLATION - Slide screwdriver or nut driver into rubber sleeve and plug the end cap’s pegs into the reinforced sleeve holes
- TEXTURIZED GRIP - Ergonomically designed rubber sleeve covers tool handle and textured rubber provides greater comfort and more efficient torquing
- SWIVELING END CAP - Features swiveling connection point for tethering and prevents tangles and binds when used with a tool lanyard
- TRIMMABLE DESIGN - Built-in trim lines on the sleeve allows for customization to fit varying driver lengths
- REUSABLE - End cap and rubber sleeve can be removed and reinstalled multiple times
- FLEXIBLE OPENING - Bottom of rubber sleeve is flexible and expands to allow for larger nut drivers to be installed
- HOLSTER ACCOMMODATING - Screwdriver or nut driver can be easily holstered with tool grip installed
- COMPATIBILITY - Compatible with screwdrivers or nut drivers with handles ranging from 1in // 2.5cm to 1.28in // 3.2cm in diameter and a handle height of 4.5in // 11.4cm
- INCLUDES 2 TOOL GRIPS
Ergodyne is committed to customers' comfort, with work gear like ergonomic supports, work gloves, hats, safety vests, and more.
Item Reviews
- This item has not been reviewed.
- Be the first to review this item.
Returns & Exchanges
30 Day Return Policy
Our return policy gives you 30 days to return your products. This 30 day period begins on the date your order is delivered and includes both business and non-business days. Returned products must be in new, unused, and resalable condition. Customized products cannot be returned. If something is wrong with your order containing customized products, please contact us at 904-296-2240
To start a return, visit our Returns Center or learn more by reading our .
Shipping Information
Under normal circumstances, in stock orders placed by 12:00 PM EST are usually shipped out the following business day (Monday through Friday, excluding national holidays).
Due to a recent surge in online ordering across the country, most in stock orders are currently shipping out in 1-3 business days. Orders containing products that are not in stock can take longer to ship. Products that are not in stock have an estimated ship time located in the stock status section of the product page.
Find more shipping information or how to track your order in the Customer Center.
EAN/UPC
- 720476197478
