Krylon Quik-Mark inverted marking paints have a high solids formulation that gives them the boldest, brightest and most visible markings in the industry. These fast-drying products penetrate and adhere to hot surfaces, and deliver a line you can count on for all your locating, marking and surveying needs. Available in solvent and water based technologies.
Product Use Instructions: For communication lines, electrical installations, athletic fields, utility marking, surveys, construction, excavation, and ground marking. Use at room temperature. Shake can well until ball rattles and repeat for 10 seconds after each minute of use. Spray 10-12 inches from surface. Spray several thin coats to avoid runs or drips. Dries to touch in 10-15 minutes. Can be handled after one hour. Clear valve after each use by turning can upside down and spraying until clear gas comes out. If spray button becomes clogged, wear eye protection, wipe off the button opening with lacquer thinner - DO NOT stick pin in spray button opening.
Krylon, the world's first aerosol paint supplier, remains the largest one today. This brand revolutionized the paint industry with marking paint, spray paint, and more.